Body Surface Area Calculator

Enter height and weight to get BSA from five published formulas side by side, with the working shown, a cardiac index helper and an educational mg/m² dose calculation.

Free, no sign-upRuns in your browserUpdated November 2026
Units
cm
kg
Cardiac index (optional)
L/min
Enter a cardiac output to get the cardiac index.
Dose per m² helper — for education only
mg/m²
Enter a dose in mg/m² to see the worked multiplication.
Learning aid only. Never use it to prescribe or check a real dose: protocols set rounding, capping, dose adjustments and independent double-checks.
Body surface area
—
For education and training; not a substitute for clinical judgement. BSA formulas are estimates; the choice of formula, dose rounding and any dose capping must follow your institution's protocol and the prescriber.

How to use the Body Surface Area Calculator

  1. Choose metric or imperial units and enter height and weight.
  2. Pick the formula for the headline result (Mosteller is the default) and compare all five in the chart.
  3. Open the working panel to see the formula with your numbers substituted.
  4. Optionally enter cardiac output for the cardiac index, or a mg/m² dose to practise the dose multiplication (education only).

What is body surface area?

Body surface area (BSA) is the estimated outer surface of the human body, in square metres (m²). Measuring it directly is impractical, so clinicians estimate it from height and weight. BSA is used because many physiological quantities, such as metabolic rate, cardiac output and kidney function, scale better with surface area than with weight alone. A typical adult BSA is somewhere around 1.6–2.0 m², and a newborn's is roughly 0.2–0.25 m².

The five BSA formulas

H is height in cm and W is weight in kg (Boyd uses weight in grams).

Mosteller (1987): BSA = √(H × W ÷ 3600) DuBois & DuBois (1916): BSA = 0.007184 × W^0.425 × H^0.725 Haycock (1978): BSA = 0.024265 × W^0.5378 × H^0.3964 Gehan & George (1970): BSA = 0.0235 × W^0.51456 × H^0.42246 Boyd (1935): BSA = 0.0003207 × H^0.3 × Wg^(0.7285 − 0.0188 × log₁₀ Wg)
  • Mosteller was published as a one-line letter in the New England Journal of Medicine in 1987. It is a simplification of the Gehan and George equation that can be worked out on a basic calculator. It is widely used and is the default here.
  • DuBois & DuBois came from direct measurements of only nine people in 1916, yet it remained the standard for decades and is still common in physiology texts and some cardiology software.
  • Haycock was derived from measurements including infants and children, and is often preferred in paediatrics.
  • Gehan & George re-fitted earlier measurement data and is used in some oncology settings.
  • Boyd lets the weight exponent change with body size, which can help at the extremes of weight.

Worked example

An adult who is 170 cm tall and weighs 70 kg:

  • Mosteller: √(170 × 70 ÷ 3600) = √3.3056 = 1.82 m²
  • DuBois: 0.007184 × 70^0.425 × 170^0.725 = 1.81 m²
  • Haycock: 1.83 m²; Gehan & George: 1.83 m²; Boyd: 1.83 m²

For an average adult the formulas agree to within a few hundredths of a square metre. The gap widens for very small children and for people with obesity, which is why protocols name the formula to use.

Uses of BSA

Chemotherapy dosing (mg/m²)

Many cytotoxic drugs are dosed per square metre: dose (mg) = dose per m² × BSA. For example, a protocol dose of 75 mg/m² for a BSA of 1.82 m² works out to 75 × 1.82 = 136.5 mg before any rounding rule is applied. The helper on this page shows that multiplication for learning only. Real prescribing involves the protocol's chosen formula, recent measured weight, dose rounding, organ-function adjustments and independent checks by pharmacists and nurses. The ASCO guideline on dosing for obese adults with cancer (Griggs et al., 2012) recommends using full weight-based doses rather than routinely capping BSA at 2.0 m². Some drugs are not dosed by BSA at all: carboplatin, for instance, is usually dosed with the Calvert formula from a target AUC and an estimate of kidney function (see the eGFR and creatinine clearance calculator).

Cardiac index

Cardiac index (CI) = cardiac output ÷ BSA, in L/min/m². It lets you compare heart output between people of different sizes. A resting CI of about 2.5–4.0 L/min/m² is usually quoted as normal; a low CI is one of the markers used in assessing shock and heart failure. With a cardiac output of 5 L/min and BSA 1.82 m², CI = 5 ÷ 1.82 ≈ 2.75 L/min/m².

Other uses

BSA is also used to index kidney function (eGFR is reported per 1.73 m², a reference adult BSA), to index echocardiographic measurements, and in some paediatric drug and fluid calculations.

Common mistakes

  • Mixing units. All the formulas expect cm and kg, except Boyd, which uses grams. Convert inches (× 2.54) and pounds (× 0.4536) first.
  • Forgetting the square root in Mosteller. H × W ÷ 3600 alone gives a number that is far too large.
  • Using an old weight. BSA-based doses should use a current measured weight.
  • Switching formulas mid-treatment. Keep the formula consistent with the protocol.

Exam tips (MBBS, nursing, pharmacy)

  • Learn Mosteller by heart: √(height cm × weight kg ÷ 3600).
  • Remember that 1.73 m² is the reference BSA used to normalise GFR.
  • Cardiac index = CO ÷ BSA; normal resting value is about 2.5–4.0 L/min/m².

Frequently asked questions

What is a normal body surface area?
There is no single normal value because BSA depends on height and weight. Most adults fall somewhere around 1.6–2.0 m². The value 1.73 m² is used as a standard adult reference, for example when reporting eGFR.
Which BSA formula is most accurate?
For typical adults the formulas give very similar results. Mosteller is the most widely used because it is simple. Haycock is often preferred in children. Follow the formula your protocol or institution specifies.
How do you calculate BSA by the Mosteller formula?
Multiply height in cm by weight in kg, divide by 3600, and take the square root. For 170 cm and 70 kg: √(170 × 70 ÷ 3600) = √3.31 ≈ 1.82 m².
Why is chemotherapy dosed by body surface area?
BSA-based dosing was adopted because many physiological processes scale better with body size than with weight alone. Dose (mg) = dose per m² × BSA. This tool’s dose helper is for education only and must not be used for real prescribing.
What is cardiac index?
Cardiac index is cardiac output divided by body surface area, in L/min/m². It adjusts heart output for body size. A resting value of about 2.5–4.0 L/min/m² is usually quoted as normal.
Should BSA be capped at 2.0 m²?
Older practice often capped BSA at 2.0 m². The ASCO guideline for obese adults with cancer (Griggs et al., 2012) recommends full weight-based dosing instead of routine capping. Local protocols decide. For education and training; not a substitute for clinical judgement.

Last reviewed November 2026. Results are estimates for information only — see our disclaimer.