How to use the Dead Pixel Test
- Clean your screen with a soft, dry microfibre cloth so dust is not mistaken for a faulty pixel.
- Pick a starting colour and press Start full-screen test.
- Click, tap or press → to step through black, white, red, green, blue and grey. Look slowly across the whole screen, including the corners, for dots that do not match.
- Press Esc (or the × button) to leave full screen. Note the position and colour of any faulty pixel for a warranty claim.
How to use a dead pixel test
Every LCD or OLED screen is made of millions of pixels, and each pixel has red, green and blue sub-pixels. A faulty pixel is hard to see in normal use because the picture keeps changing. Filling the entire screen with one solid colour makes any pixel that behaves differently stand out. This tool switches your browser to full screen using the standard Fullscreen API and paints one flat colour at a time — no images, no compression, just pure colour values sent straight to the display.
Dim the room, sit at a normal viewing distance and then move closer, and sweep your eyes across the screen in rows. A magnifying glass or your phone camera zoomed in can help confirm a suspect spot. Check the corners and edges carefully, as they are easy to skip.
Dead, stuck or hot pixel?
| Type | What you see | Best background to spot it |
|---|---|---|
| Dead pixel | Always black — it never lights up | White, and also red, green or blue |
| Stuck pixel | Always one colour (red, green, blue, cyan, magenta or yellow) | Black, plus the other solid colours |
| Hot pixel | Always white or very bright | Black |
| Dead sub-pixel | A tinted dot only on some colours (for example, missing on red) | Red, green and blue in turn |
A stuck pixel is usually a sub-pixel transistor that stays switched on, while a dead pixel is one that stays switched off. Stuck pixels sometimes recover on their own; truly dead pixels rarely do. A cluster of several bad pixels, a line across the screen or a spot that grows over time points to a panel or cable fault rather than a single pixel.
What about the grey screen?
Mid-grey is not for pixels — it reveals backlight bleed (light leaking at the edges of LCDs), clouding, uneven brightness and faint image retention or burn-in on OLED panels. A little edge glow on a black screen in a dark room is normal for many LCD monitors; obvious bright patches visible in normal use are worth reporting.
Can a stuck pixel be fixed?
Sometimes. Common approaches are leaving the screen off for a while, or gently massaging the spot through a soft cloth while the screen is on. Pressing too hard can damage the panel and may void your warranty, so be careful and stop if you see the area react badly.
Some websites offer “pixel fixer” videos that flash colours very rapidly. We deliberately do not, because rapid full-screen flashing can trigger seizures in people with photosensitive epilepsy, and there is little reliable evidence that it works. The optional slow auto-cycle on this page never changes faster than once every three seconds.
Is one dead pixel covered by warranty?
Manufacturers follow pixel-fault policies, often based on the ISO 9241-307 (formerly ISO 13406-2) pixel-fault classes, which allow a small number of defects depending on the class and the panel size. In practice many brands will not replace a monitor for just one or two stuck pixels, while some premium lines advertise a “zero bright dot” or zero dead pixel guarantee. Policies vary by brand, model and country, so:
- Test immediately after buying — retailers’ return windows are usually easier than a warranty claim.
- Photograph the fault next to a ruler and note its colour and position.
- Read the specific pixel policy for your model on the manufacturer’s website before contacting support.
Tips for an accurate result
- Set the screen to its native resolution and turn off night mode or blue-light filters, which tint the colours. You can check your settings with the screen resolution checker.
- On phones, also turn off auto-brightness and hide the status bar if possible; some phones do not allow web pages to go fully full screen, in which case the overlay fills the browser window instead.
- Test laptops on battery and on mains power — some panels behave differently at different brightness levels.
- Repeat the test after a few days if you found a stuck pixel; it may have cleared.
Frequently asked questions
How do I check my monitor for dead pixels?
What is the difference between a dead pixel and a stuck pixel?
Can dead pixels spread?
Does this test work on phones and TVs?
Is the dead pixel test safe for people with epilepsy?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.