Significant Figures Calculator

Count the significant figures in any number, round to the precision you need, and do sig-fig arithmetic the way chemistry and physics marking schemes expect.

Free, no sign-upRuns in your browserUpdated November 2026
Mode
Try 1200, 1200., 0.00120 or 1.20e3. Scientific notation such as 6.022 × 10^23 also works.
Significant figures
—
Digit by digit
7 significant 0 not significant 0 ambiguous
Scientific notation
—
E notation
—
Rules applied / working
—

How to use the Significant Figures Calculator

  1. Choose Count, Round or Calculate.
  2. Type a number such as 0.004050, 1200, 1200. or 1.20e3. The calculator colours each digit and lists the rule that applies to it.
  3. To round, enter the number of significant figures you need. The answer is shown in standard form and in scientific notation.
  4. To calculate, enter two measurements and an operation. The answer is rounded by decimal places for + and −, or by significant figures for × and ÷.

What significant figures are

The significant figures (sig figs) of a measured value are the digits that carry real information about its precision: every certain digit plus the first uncertain one. A length written as 12.30 cm says the ruler read to a hundredth of a centimetre, while 12.3 cm says it read only to a tenth. NCERT class 11 Physics (Units and Measurement) and Chemistry (Some Basic Concepts of Chemistry) both teach the same rules, and NEET and JEE questions test them directly.

Rules for counting significant figures

RuleExampleSig figs
All non-zero digits are significant285.74
Zeros between non-zero digits are significant2.0054
Leading zeros are never significant0.00422
Trailing zeros after a decimal point are significant4.5004
Trailing zeros in a whole number without a decimal point are ambiguous12002 (maybe 3 or 4)
A decimal point makes trailing zeros count1200.4
In scientific notation every digit of the coefficient counts1.20 × 10³ (1.20e3)3
Exact and counted numbers have unlimited sig figs12 eggs, 100 cm in 1 m∞

The calculator follows these rules digit by digit. Green digits are significant, grey digits are placeholders, and amber digits are trailing zeros whose status the number alone cannot tell you. For an ambiguous number it reports the minimum count and the range (for 1200, "2 (could be 2–4)"), and shows how to write it in scientific notation so there is no doubt.

Rounding to n significant figures

Start at the first non-zero digit and count n digits. Look at the next digit: if it is 5 or more, round the last kept digit up; if it is less than 5, leave it. Dropped digits before the decimal point become zeros, and dropped digits after it disappear. This is the round-half-up rule used in Indian school textbooks.

Worked example: round 0.0456789 to 3 s.f. The significant digits start at 4, so keep 456. The next digit is 7, so round up to 457. The answer is 0.0457, or 4.57 × 10⁻². Rounding 99.96 to 3 s.f. carries all the way up: the answer is 100., with a decimal point to show that both zeros count, or 1.00 × 10².

Significant figures in calculations

× and ÷ : answer has the same number of sig figs as the input with the FEWEST sig figs + and − : answer has the same number of decimal places as the input with the FEWEST decimal places

Multiplication example: 4.56 × 1.4 = 6.384. 4.56 has 3 s.f. and 1.4 has 2 s.f., so the answer is rounded to 2 s.f.: 6.4.

Addition example: 12.11 + 18.0 + 1.013 = 31.123. The least precise number, 18.0, has 1 decimal place, so the answer is 31.1. Notice that the answer has 3 s.f. even though 1.013 has 4. For addition, decimal places matter, not significant figures.

The calculator does this arithmetic on exact decimal strings rather than binary floating point, so a sum such as 0.1 + 0.2 comes out exactly as 0.3, never 0.30000000000000004.

Common mistakes

  • Counting leading zeros. 0.00250 has 3 s.f. (2, 5 and the final 0), not 6.
  • Using the sig-fig rule for addition. 150.0 + 0.512 = 150.5, not 151.
  • Rounding at every step of a long calculation. Keep one or two extra digits until the end, then round once. Rounding early can change the final digit.
  • Applying sig-fig limits to exact numbers such as the 2 in 2πr, or a count of 20 drops. These never limit the answer.
  • Writing 2000 when you mean 4 s.f. Write 2.000 × 10³ instead.

Exam tips for class 11, NEET and JEE

  • A favourite MCQ asks for the sig figs in 0.0500, 5.00 × 10⁻² and 500. Each of these has 3.
  • For a value with an exponent, convert to scientific notation first. The power of 10 never adds sig figs.
  • In a mixed calculation such as (12.1 + 3.25) × 2.0, apply the addition rule to the bracket (15.35 → 15.4, keep a guard digit while working), then the multiplication rule to the product (2 s.f.: 31).
  • Logs follow their own convention. The number of decimal places in log x equals the number of sig figs in x, so [H⁺] = 2.0 × 10⁻⁴ M (2 s.f.) gives pH = 3.70 (2 decimal places). See the logarithm calculator.

Frequently asked questions

How many significant figures are in 100?
Written as 100 with no decimal point, it has 1 significant figure for certain. The two trailing zeros are ambiguous, so it could have 1, 2 or 3. Write 100. (with a decimal point) or 1.00 × 10² for 3, or 1.0 × 10² for 2.
Are trailing zeros significant?
Trailing zeros are significant when the number has a decimal point, as in 2.50 or 120.0. In a whole number without a decimal point, such as 4500, they are ambiguous and are usually not counted.
How many significant figures are in 0.00450?
Three: 4, 5 and the final 0. The leading zeros only place the decimal point. The trailing zero after the decimal point is significant because it shows the measurement was precise to that place.
What is the rule for significant figures when multiplying?
The answer gets as many significant figures as the measurement with the fewest. For example, 2.5 × 3.42 = 8.55, which rounds to 8.6 (2 s.f.).
What is the rule for adding and subtracting with significant figures?
Round the answer to the fewest decimal places among the numbers. For example, 25.1 + 1.245 = 26.345, which rounds to 26.3 because 25.1 has only one decimal place.
How do I write a number in scientific notation with the right sig figs?
Move the decimal point so that one non-zero digit is before it, and keep only the significant digits in the coefficient. For example, 0.004050 becomes 4.050 × 10⁻³ (4 s.f.).

Last reviewed November 2026. Results are estimates for information only — see our disclaimer.