How to use the Molarity Calculator
- Pick a mode: Molarity, Dilution, Molality, Normality, ppm or % w/v.
- Type the solute formula (for example NaCl or CuSO4·5H2O) so the molar mass is worked out for you, or enter the molar mass directly.
- Choose what to solve for and fill in the other values. The solved field is greyed out and fills in by itself as you type.
- Read the answer, the step-by-step working and the lab-prep instructions, then copy the page link to share the exact setup.
Molarity formula
Molarity (M) is the number of moles of solute in one litre of solution. It is the concentration unit used most in Indian school and college labs, and it is defined in NCERT Class 11 (Some Basic Concepts of Chemistry) and Class 12 (Solutions).
The molar mass comes from the formula. This page works it out with IUPAC 2021 atomic weights, the same as our molar mass calculator.
Worked example: 100 mL of 1 M NaCl
The molar mass of NaCl is 22.990 + 35.45 = 58.44 g/mol.
Dissolve 5.844 g of NaCl in about 70 mL of distilled water, transfer it to a 100 mL volumetric flask, rinse the beaker into the flask, and make up to the mark. The volume in the formula is the final volume of solution, not the volume of water you add.
Dilution: C₁V₁ = C₂V₂
Adding solvent does not change the number of moles of solute, so C₁V₁ = C₂V₂ (also written M₁V₁ = M₂V₂). To make 250 mL of 0.1 M solution from a 1 M stock:
Pipette 25 mL of stock into a 250 mL flask and make up to the mark. The dilution factor is 250 ÷ 25 = 10. The units only need to match on both sides, so the same equation works for %, mg/L or normality.
Molality, normality, ppm and % w/v
| Unit | Definition | Changes with temperature? |
|---|---|---|
| Molarity (M, mol/L) | moles of solute per litre of solution | Yes (volume expands) |
| Molality (m, mol/kg) | moles of solute per kg of solvent | No |
| Normality (N) | gram equivalents per litre of solution = M × n-factor | Yes |
| ppm | mass of solute ÷ mass of solution × 10⁶ (≈ mg/L for dilute water solutions) | No (by mass) |
| % w/v | grams of solute per 100 mL of solution | Yes |
Molality is used for colligative properties (boiling-point elevation and freezing-point depression) because it does not depend on temperature. Example: 5.844 g NaCl (0.1 mol) in 500 g water gives 0.1 ÷ 0.5 = 0.2 mol/kg. To convert molarity to molality you need the solution density d (g/mL):
Normality uses the n-factor: the number of H⁺ an acid gives, the number of OH⁻ a base gives, the total cation charge for a salt, or the electrons gained or lost per formula unit in a redox reaction. For H₂SO₄ (98.07 g/mol, n-factor 2), 4.904 g in 100 mL is 0.5 M and therefore 1 N. Normality is no longer recommended by IUPAC, but it still appears in titration questions and older lab manuals.
% w/v is common in medicine. Normal saline is 0.9 % w/v NaCl: 9 g/L ÷ 58.44 g/mol = 0.154 M.
Common mistakes
- Using mL in the molarity formula. Convert to litres first (100 mL = 0.100 L), or the answer is 1000 times too big.
- Adding 100 mL of water instead of making up to 100 mL. The solute takes up space, so the final volume would be more than 100 mL.
- Mixing up molarity and molality. Molarity divides by litres of solution; molality divides by kilograms of solvent.
- Weighing the wrong form. CuSO₄·5H₂O (249.68 g/mol) and anhydrous CuSO₄ (159.60 g/mol) need different masses for the same molarity.
- Wrong n-factor. The n-factor of KMnO₄ depends on the medium: 5 in acid, 3 in neutral and 1 in strongly basic solution.
Exam tips
- Write the units at every step. If they cancel to mol/L, the set-up is right.
- For mixing two solutions of the same solute, total moles = M₁V₁ + M₂V₂ and total volume = V₁ + V₂.
- Titration questions use N₁V₁ = N₂V₂, or M₁V₁ ÷ n₁ = M₂V₂ ÷ n₂ from the balanced equation. Balance it first with the chemical equation balancer.
- Round only at the end and match the significant figures of the data (see the significant figures calculator).
Frequently asked questions
How do you calculate molarity?
How many grams do I need to make a solution of a given molarity?
What is the difference between molarity and molality?
How do I use C1V1 = C2V2?
What is the relation between normality and molarity?
Is 1 ppm the same as 1 mg/L?
How do I make 0.9% saline?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.