How to use the Kinematics Calculator (SUVAT)
- Enter any three of displacement s, initial velocity u, final velocity v, acceleration a and time t, and leave the other two boxes blank.
- Choose a positive direction and give each quantity its sign. For a ball thrown upward with up as positive, enter a = −9.8 m/s². Pick units (km/h, km, min) from the drop-downs.
- Read the two unknowns in the answer box. If the problem has two valid answers (an object passing the same point twice), both are shown.
- Check the step-by-step working, then use the v–t and s–t graphs and the nth-second box to answer follow-up questions.
The equations of motion (SUVAT)
For motion in a straight line with constant acceleration, five quantities describe everything: displacement s, initial velocity u, final velocity v, acceleration a and time t. They are linked by the equations of motion taught in NCERT Class 9 (Chapter 8, Motion) and Class 11 (Motion in a Straight Line). Each equation leaves out one quantity, so if you know any three you can always find the other two.
The calculator chooses the equation that does not contain the unknown you are not looking for, exactly as you would in an exam, and shows the substitution.
Sign convention
All five quantities except time are vectors in one dimension, so they carry a sign. Choose one direction as positive and stick to it for the whole problem. If you take upward as positive, a ball thrown up has u > 0 and a = −g. If you take downward as positive, a dropped stone has a = +g. A braking car moving forward has a negative acceleration (a retardation). Most wrong answers in this chapter come from mixing these signs.
Worked example 1: free fall
A stone is dropped from a 45 m tall building. Take down as positive, so u = 0, a = 9.8 m/s², s = 45 m.
- From v² = u² + 2as: v = √(2 × 9.8 × 45) = √882 ≈ 29.7 m/s.
- From v = u + at: t = 29.7 / 9.8 ≈ 3.03 s.
With g = 10 m/s² (common in JEE problems) the same stone gives exactly 30 m/s and 3 s.
Worked example 2: when there are two answers
A ball is thrown straight up at 20 m/s. When is it 15 m above the launch point? Take up as positive: u = 20, a = −9.8, s = 15. Then ½at² + ut − s = 0 becomes 4.9t² − 20t + 15 = 0, with roots t ≈ 0.99 s (on the way up, v ≈ +10.3 m/s) and t ≈ 3.09 s (on the way down, v ≈ −10.3 m/s). Both are physically correct, so the calculator reports both. A negative root would mean a time before the motion started, so it is rejected.
Worked example 3: braking car and the nth second
A car moving at 72 km/h (20 m/s) stops in 4 s. Then a = (0 − 20)/4 = −5 m/s² and s = (20 + 0) × 4 / 2 = 40 m. The distance covered in the 3rd second is s₃ = 20 + (−5)(2 × 3 − 1)/2 = 7.5 m.
Reading the motion graphs
| Graph | Shape for constant a | What it tells you |
|---|---|---|
| v–t | Straight line | Slope = acceleration; area under the line = displacement |
| s–t | Parabola (straight line if a = 0) | Slope at any point = instantaneous velocity; the peak is where v = 0 |
| a–t | Horizontal line | Area under it = change in velocity |
Common mistakes
- Ignoring signs. Writing a = 9.8 for an upward throw with up as positive gives a ball that never comes down.
- Mixing units. Convert km/h to m/s (divide by 3.6) before using the equations. The unit drop-downs here do it for you.
- Confusing displacement with distance. If the body turns back, the distance travelled is larger than the displacement. The table shows both.
- Using the nth-second formula for distance after a turn-around. sₙ is a displacement; if the velocity changes sign inside that second, the distance is different, and the calculator flags it.
- Using SUVAT when acceleration is not constant. These equations only hold for uniform acceleration. For variable acceleration you need calculus (v = ds/dt, a = dv/dt).
Exam tips for CBSE, JEE and NEET
- List s, u, v, a, t at the start of every problem and tick the three you know. The missing one tells you which equation to use.
- "Starts from rest" means u = 0; "comes to rest" or "maximum height" means v = 0.
- For a body thrown up and caught at the same level, time up equals time down and the speed on return equals the launch speed.
- For two-dimensional motion, apply the same equations separately along x and y, as the projectile motion calculator does.
- Check energy-based answers with the work, energy and power calculator: ½mv² = mgh gives the same free-fall speed.
Frequently asked questions
What are the three equations of motion?
How do I know which equation of motion to use?
Why does the calculator show two answers for time?
What value of g should I use?
What is the formula for distance travelled in the nth second?
Can acceleration be negative?
Why does it say the motion is impossible?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.