Work, Energy and Power Calculator

Seven physics calculators in one: kinetic energy, potential energy, work at an angle, power, the work–energy theorem and efficiency, each with the formula, substituted working and every common unit.

Free, no sign-upRuns in your browserUpdated November 2026
m/s²
°

Result
—
Step-by-step working (SI units)

Unit conversions
UnitValue

1 kWh = 3.6 × 10⁶ J (one "unit" on an electricity bill). 1 cal = 4.184 J (thermochemical calorie). 1 eV = 1.602176634 × 10⁻¹⁹ J. Metric horsepower (PS) = 735.49875 W ≈ 735.5 W; mechanical (imperial) hp = 745.7 W.

Diagram

How to use the Work, Energy and Power Calculator

  1. Choose what to calculate: kinetic energy, potential energy, work, power (W/t or F·v), the work–energy theorem or efficiency.
  2. Enter the values shown for that mode and pick units from the drop-downs (g or tonne, km/h, cm or km, kWh or calories). Everything is converted to SI internally.
  3. Read the answer in joules or watts, with kJ, kWh and horsepower below it, and the extra results such as momentum or average force.
  4. Follow the step-by-step working, then use the conversion table and the diagram to check the answer or switch units.

Formulas used

This calculator follows the definitions in NCERT Class 9 (Work and Energy) and Class 11 (Work, Energy and Power). All working is done in SI units: kilograms, metres, seconds, newtons, joules and watts.

Kinetic energy KE = ½ m v² Potential energy PE = m g h Work done W = F d cos θ Power P = W / t = F v Work–energy theorem W_net = ½ m v² − ½ m u² = ΔKE Efficiency η = (useful output / total input) × 100%

Work and energy are measured in joules (1 J = 1 N × 1 m). Power is measured in watts (1 W = 1 J/s).

Worked examples

Kinetic energy

A 1,000 kg car moves at 72 km/h. Convert first: 72 ÷ 3.6 = 20 m/s. Then KE = ½ × 1000 × 20² = 200,000 J = 200 kJ. At 36 km/h (half the speed) the KE is a quarter of this, 50 kJ, which is why braking distance grows so quickly with speed.

Work at an angle

A child pulls a toy with a 50 N force at 60° to the ground and moves it 10 m. W = 50 × 10 × cos 60° = 50 × 10 × 0.5 = 250 J. Only the component F cos θ = 25 N along the motion does work.

Power of a motor

A pump lifts 100 kg of water through 15 m in 30 s (g = 9.8 m/s²). Work = mgh = 100 × 9.8 × 15 = 14,700 J, so P = 14,700 / 30 = 490 W, about 0.67 metric hp.

Work–energy theorem

A 2 kg ball slows from 10 m/s to 4 m/s over 7 m. W_net = ½ × 2 × (4² − 10²) = −84 J. The average net force is −84 / 7 = −12 N, a resistive force of 12 N.

Sign of work: a quick table

Angle θcos θWorkExample
0°1Positive, maximum (Fd)Pushing a trolley forward
0° < θ < 90°between 0 and 1PositivePulling a suitcase by an angled handle
90°0ZeroCarrying a bag horizontally; centripetal force on a body in uniform circular motion
90° < θ ≤ 180°negativeNegativeFriction; brakes; gravity on a rising ball

Energy and power units

  • kWh: the "unit" on an Indian electricity bill. 1 kWh = 1,000 W × 3,600 s = 3.6 × 10⁶ J.
  • Calorie: this tool uses the thermochemical calorie, 1 cal = 4.184 J. The food "Calorie" is a kilocalorie (4,184 J).
  • Electron volt: the energy gained by an electron through 1 V, 1 eV = 1.602176634 × 10⁻¹⁹ J (exact since the 2019 SI redefinition). Used in modern physics and chemistry.
  • Horsepower: there are two. The metric horsepower (PS), used for Indian and European vehicles, is 735.49875 W (≈ 735.5 W). The mechanical (imperial) horsepower, used in the US and UK, is 745.7 W. NCERT uses 1 hp = 746 W.

Common mistakes

  • Forgetting to convert km/h to m/s, or grams to kilograms, before using ½mv².
  • Using sin θ instead of cos θ. θ is measured between the force and the displacement.
  • Saying no work is done when you hold a heavy box still. Your muscles use energy, but the work done on the box (Fd) is zero because d = 0.
  • Using the speed difference instead of the difference of squares: ΔKE = ½m(v² − u²), not ½m(v − u)².
  • Getting an efficiency above 100%. Output can never exceed input; check that both values are in the same unit.

Exam tips

  • When an object falls freely, mgh lost equals ½mv² gained, so v = √(2gh). You can check this against the kinematics calculator.
  • For a vehicle at constant speed, the engine force equals the resistive force, so P = F v gives the power needed.
  • Electrical power works the same way: P = VI. Use the Ohm's law calculator for circuits.
  • Work, energy and power are scalars. Only the sign of work carries direction information.

Frequently asked questions

What is the difference between work, energy and power?
Work is energy transferred by a force acting through a displacement (W = Fd cos θ). Energy is the capacity to do work. Power is how fast work is done or energy is transferred (P = W/t). Work and energy are measured in joules, power in watts.
How do you calculate kinetic energy?
KE = ½mv², with mass in kilograms and speed in metres per second, giving joules. For a 2 kg ball at 3 m/s, KE = ½ × 2 × 9 = 9 J.
When is work done zero even though a force acts?
When the displacement is zero, or when the force is perpendicular to the displacement (θ = 90°, cos θ = 0). Examples are holding a load still, carrying a bag horizontally at steady speed, and the centripetal force in uniform circular motion.
What is the work-energy theorem?
The net work done on a body by all the forces acting on it equals the change in its kinetic energy: W_net = ½mv² − ½mu². It is useful when the forces are not constant or when you know the speeds but not the time.
How many watts is 1 horsepower?
It depends on which horsepower. The metric horsepower (PS), used in India and Europe, is 735.49875 W, about 735.5 W. The mechanical or imperial horsepower is 745.7 W. NCERT textbooks round it to 746 W.
How many joules are in 1 kWh?
1 kWh = 1,000 W × 3,600 s = 3.6 × 10⁶ joules. One kWh is one "unit" of electricity on your bill.
Can efficiency be more than 100%?
No. Energy is conserved, so useful output can never exceed input. Real machines always lose some energy as heat, sound or friction, so their efficiency is below 100%.

Last reviewed November 2026. Results are estimates for information only — see our disclaimer.