VO2 Max Calculator

Estimate maximal oxygen uptake from four field tests used in physiotherapy and sports-science labs, with the exact published equations and every step shown.

Free, no sign-upRuns in your browserUpdated November 2026
Test
Run (or run-walk) as far as possible in exactly 12 minutes on a measured track.
Estimated VO₂max
—
METs (VO₂max ÷ 3.5)
—
Method
—
Step-by-step working
    How the estimate changes
    For education and training; not a substitute for clinical judgement. Field-test equations are estimates; a graded exercise test with gas analysis is the reference method. Anyone with heart, lung or other medical conditions should be screened before maximal-effort testing.

    How to use the VO2 Max Calculator

    1. Pick the test you performed: Cooper 12-minute run, Rockport 1-mile walk, resting heart-rate ratio or 1.5-mile run.
    2. Enter the test result — distance, time, or heart rates — plus age, sex and weight where the equation needs them. Choose metres, kilometres or miles, and kg or lb.
    3. Read the estimated VO₂max in mL/kg/min and METs; it updates as you type.
    4. Open the step-by-step working to see the published equation with your numbers substituted, and use the chart to see how the result responds to the main input.

    What is VO₂max?

    VO₂max (maximal oxygen uptake) is the highest rate at which the body can take up and use oxygen during intense, whole-body exercise. It reflects how well the lungs, heart, blood and working muscles deliver and use oxygen, and it is the standard measure of cardiorespiratory fitness in exercise physiology. It is usually expressed relative to body mass in mL·kg⁻¹·min⁻¹; multiplying by body mass in kg and dividing by 1,000 gives the absolute value in L/min.

    The reference method is a graded exercise test on a treadmill or cycle ergometer with expired-gas analysis. Field tests like the four below are cheaper and need no lab, so they are used widely in physiotherapy, sports-science practicals and fitness screening. Each one predicts VO₂max from a regression equation, so it carries an error compared with a lab test.

    The four equations used here

    1. Cooper 12-minute run (Cooper, JAMA 1968) VO₂max = (d − 504.9) ÷ 44.73 d = distance in metres 2. Rockport 1-mile walk test (Kline et al., Med Sci Sports Exerc 1987) VO₂max = 132.853 − 0.0769·W − 0.3877·A + 6.315·S − 3.2649·T − 0.1565·HR W = weight (lb), A = age (years), S = 1 male / 0 female, T = walk time (min, decimal), HR = heart rate at the finish (bpm) 3. Heart-rate ratio method (Uth et al., Eur J Appl Physiol 2004) VO₂max = 15.3 × HRmax ÷ HRrest HRmax = 208 − 0.7 × age (Tanaka et al., 2001) or 220 − age 4. 1.5-mile run VO₂max = 3.5 + 483 ÷ t t = run time in minutes
    • Cooper test. Kenneth Cooper related the distance covered in 12 minutes to treadmill VO₂max in US Air Force men. It needs a measured track and an all-out, evenly paced effort.
    • Rockport walk test. Kline and colleagues developed it in adults aged 30–69 as a submaximal option for people who should not run. Note that the published equation uses pounds; this calculator converts kg for you.
    • Heart-rate ratio. Uth and colleagues found that the ratio of maximal to resting heart rate, multiplied by 15.3, predicted VO₂max in well-trained men aged 21–51. It needs no exercise at all if HRmax is age-predicted, but that prediction is the weak link.
    • 1.5-mile run. The 3.5 + 483 ÷ t equation is the one most textbooks and fitness-testing manuals give for the 1.5-mile (2.4 km) run. Treat it as a rough estimate.

    Worked examples

    • Cooper: 2,400 m in 12 minutes → (2400 − 504.9) ÷ 44.73 = 1895.1 ÷ 44.73 = 42.4 mL/kg/min (≈ 12.1 METs).
    • Rockport: a 40-year-old man weighing 70 kg (154.3 lb) walks the mile in 15:00 and finishes at 130 bpm → 132.853 − 11.867 − 15.508 + 6.315 − 48.974 − 20.345 = 42.5 mL/kg/min.
    • Heart-rate ratio: age 30, resting HR 60 bpm, Tanaka HRmax = 208 − 21 = 187 bpm → 15.3 × 187 ÷ 60 = 47.7 mL/kg/min. With 220 − age (190 bpm) the answer is 48.45, which shows how much the HRmax choice matters.
    • 1.5-mile run: 12:00 → 3.5 + 483 ÷ 12 = 3.5 + 40.25 = 43.8 mL/kg/min.

    Interpreting the number

    OutputMeaning
    mL/kg/minRelative VO₂max — use it to compare people of different body mass.
    L/minAbsolute VO₂max — total oxygen uptake, larger in bigger people.
    METsVO₂max ÷ 3.5. One MET is the conventional resting oxygen uptake of 3.5 mL/kg/min.

    VO₂max falls with age and is, on average, lower in women than in men. To grade a result as poor, fair, good and so on, compare it with a published normative table for the same age group and sex, such as the percentile tables in the ACSM's Guidelines for Exercise Testing and Prescription (based on Cooper Institute data). This calculator does not assign a category, because norms differ between populations and editions.

    Common mistakes

    • Entering kg into the Rockport equation. The coefficient 0.0769 is per pound. Using kg without converting inflates VO₂max by several units.
    • Writing 12:30 as 12.30 minutes. Thirty seconds is 0.5 min, so 12:30 = 12.5 min. Use the separate minute and second boxes.
    • Late heart-rate counts. Heart rate falls quickly after exercise; for the Rockport test take it right at the finish.
    • Uneven pacing. Starting too fast in the Cooper or 1.5-mile test leads to a shorter distance or slower time and underestimates fitness.
    • Applying an equation outside its sample. Each was developed in a specific group; results in children, older adults, patients or elite athletes are less certain.

    Exam and practical tips

    • State the units every time: VO₂max is mL·kg⁻¹·min⁻¹ unless you say absolute (L/min).
    • Know which tests are maximal (Cooper, 1.5-mile) and which are submaximal (Rockport walk, heart-rate ratio). Submaximal tests are preferred for deconditioned or older clients.
    • In viva questions, name the source and the variables: Rockport uses weight, age, sex, time and finishing heart rate.
    • Mention screening (for example a PAR-Q+ questionnaire) before any maximal test.

    For training intensities based on heart rate, see the heart rate zone calculator; for running pace and splits, the pace calculator.

    Frequently asked questions

    How do you calculate VO2 max without a lab?
    Use a validated field test and its prediction equation: distance in the Cooper 12-minute run, time and finishing heart rate in the Rockport 1-mile walk, time in the 1.5-mile run, or the ratio of maximal to resting heart rate (Uth method). Each gives an estimate; only a graded test with gas analysis measures VO₂max directly.
    What is the Cooper test formula?
    VO₂max = (distance in metres − 504.9) ÷ 44.73, from Cooper (JAMA, 1968). For example, 2,400 m gives about 42.4 mL/kg/min.
    What is the Rockport walk test equation?
    Kline et al. (1987): VO₂max = 132.853 − 0.0769 × weight (lb) − 0.3877 × age + 6.315 × sex (1 for male, 0 for female) − 3.2649 × time (min) − 0.1565 × heart rate at the finish (bpm).
    How accurate is the resting heart rate method for VO2 max?
    Uth et al. (2004) derived the 15.3 factor in well-trained men aged 21–51, so accuracy is lower in other groups. The biggest source of error is usually an age-predicted maximum heart rate, which can differ from the true value by 10 bpm or more; a measured HRmax improves the estimate.
    What is a good VO2 max?
    It depends on age and sex. Compare your result with a published normative table for your age group, such as the ACSM percentile tables. Higher values within your age and sex group indicate better cardiorespiratory fitness.
    Why does VO2 max use mL/kg/min?
    Dividing by body mass lets you compare people of different sizes and relates oxygen uptake to the work of moving your own body. Absolute VO₂max in L/min is used when body mass is supported, for example in cycling or rowing comparisons.

    Last reviewed November 2026. Results are estimates for information only — see our disclaimer.