How to use the Concrete Calculator
- Pick the shape: a rectangular slab or footing, a round column or post hole, or a set of steps.
- Choose feet / inches or meters / cm. Values you have already entered are converted automatically.
- Enter the dimensions, the quantity of identical pours (for example 8 post holes), and a waste allowance (10% is a common default).
- Read the volume in cubic yards, cubic meters and cubic feet, and the number of 40, 60, 80 lb or 25 kg bags needed.
How to calculate concrete volume
Concrete is ordered by volume: cubic yards in the US and cubic meters in most other countries. Find the volume of the form in cubic feet or cubic meters, add an allowance for waste, then convert to the unit your supplier uses or to a number of bags. The key step is to put every dimension in the same unit before multiplying. Slab thickness is usually given in inches, so divide it by 12 to get feet.
In the steps formula, n is the number of steps. Each step is treated as a solid block down to the ground, which is how most poured steps are formed. The top step can be deeper to act as a landing.
Worked example: a 10 × 10 ft patio slab
A patio 10 ft long, 10 ft wide and 4 in thick: 4 in ÷ 12 = 0.333 ft, so the volume is 10 × 10 × 0.333 = 33.33 ft³, or 33.33 ÷ 27 = 1.23 yd³. With 10% added for waste, you need 36.67 ft³ ≈ 1.36 yd³ ≈ 1.04 m³.
In bags: 36.67 ÷ 0.60 = 61.1, so 62 bags of 80 lb premix. Or 36.67 ÷ 0.45 = 81.5, so 82 bags of 60 lb, or 123 bags of 40 lb. Always round up. These are the default values above.
Premix bag yields
The yields below are the figures commonly printed on standard dry concrete mix bags in the US. The 25 kg figure is scaled from the same yield per pound. Products vary, especially fast-setting, high-strength and fibre mixes, so check the label on the bag you buy.
| Bag size | Approx. yield | Bags per cubic yard | Bags per cubic meter |
|---|---|---|---|
| 80 lb | 0.60 ft³ (0.017 m³) | 45 | 59 |
| 60 lb | 0.45 ft³ (0.0127 m³) | 60 | 79 |
| 40 lb | 0.30 ft³ (0.0085 m³) | 90 | 118 |
| 25 kg | ≈ 0.41 ft³ (≈ 0.0117 m³) | 66 | 86 |
Common slab thicknesses
| Use | Typical thickness |
|---|---|
| Walkways, patios, shed bases | 4 in (10 cm) |
| Residential driveways, garage floors | 4–6 in (10–15 cm) |
| Heavier vehicles, hot tubs | 6 in (15 cm) or more |
These are general rules of thumb. Local building codes, soil conditions and reinforcement decide what is right for your project, so check them before you pour.
Tips to avoid running short
- Add 5–10% waste. Uneven ground, form bowing and spillage all use extra concrete. Use more on rough or hand-dug sub-bases.
- Measure depth in several places. A sub-base that is half an inch low across a large slab adds a surprising amount of volume.
- Bags or ready-mix? Mixing dozens of bags by hand is heavy, slow work. For larger pours, many people find ready-mix delivery more practical. Ask local suppliers about minimum loads and short-load fees.
- Post holes: use the column shape with the hole diameter and depth, and set the quantity to the number of holes.
- Area first: for irregular slabs, find the area with the square footage calculator, then multiply by the thickness in feet.
Estimates only. Confirm quantities, mix strength and reinforcement with your supplier or a qualified contractor.
Frequently asked questions
How do I calculate cubic yards of concrete?
How many 80 lb bags of concrete are in a yard?
How many bags of concrete do I need for a 10×10 slab?
How much extra concrete should I order?
How do I calculate concrete for steps?
How much concrete for a post hole?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.