Paint Calculator

Find out how much paint you need for a room or a set of walls, after doors and windows, in gallons and litres rounded up to what you can buy.

Free, no sign-upRuns in your browserUpdated November 2026
Measure by
Units
ft
ft
ft
sq ft
sq ft
sq ft/gal
Example coverage only. Use the figure printed on your paint can; rough or porous surfaces cover less.
Paint to buy
—
Paintable wall area
—
Wall paint (exact)
—
Gallons (rounded up)
—
Litres (rounded up)
—

How to use the Paint Calculator

  1. Choose Room size to enter length, width and wall height, or Wall list to enter each wall separately (saved in this browser). Pick feet or meters.
  2. Enter the number of doors and windows and their typical size so they are subtracted from the wall area.
  3. Choose the number of coats and check the coverage against the label on your paint can.
  4. Tick Also paint the ceiling if needed, then read how many gallons or litres to buy, rounded up.

How much paint do I need?

Paint quantity depends on three things: the area you are painting, the number of coats, and how far the paint spreads (its coverage or spreading rate). Work out the wall area, subtract doors and windows, multiply by the coats, and divide by the coverage on the can.

Wall area = 2 × (length + width) × height Paint area = wall area − (doors × door area) − (windows × window area) Paint = paint area × coats ÷ coverage per gallon (or per litre)

This calculator uses 350 sq ft per gallon or 10 m² per litre as editable starting points. Many interior wall paints quote figures in roughly this range for smooth, primed surfaces. Coverage drops on rough, textured or porous surfaces such as new plaster or bare drywall, so always use the manufacturer's number when you have it.

Worked example

A bedroom is 14 ft × 12 ft with 8 ft walls. Wall area = 2 × (14 + 12) × 8 = 416 sq ft. Subtract one door (21 sq ft) and two windows (15 sq ft each): 416 − 21 − 30 = 365 sq ft. Two coats cover 730 sq ft. At 350 sq ft per gallon that is 730 ÷ 350 = 2.09 gallons (about 7.9 litres). Round up to 3 gallons, or buy 2 gallons plus 1 quart (2.25 gallons) if your store sells quarts. The 14 × 12 ft ceiling is 168 sq ft. Two coats need 336 ÷ 350 = 0.96 gallon, so 1 gallon of ceiling paint.

Metric example: a 5 m × 4 m room with 2.5 m walls has 45 m² of wall. Subtract a 1.9 m² door and two 1.4 m² windows to get 40.3 m². Two coats at 10 m²/L need 8.06 L, so buy at least 9 L.

Typical sizes to subtract

OpeningTypical sizeArea
Interior door3 × 7 ft (0.9 × 2.1 m)≈ 21 sq ft (≈ 1.9 m²)
Standard window3 × 5 ft (0.9 × 1.5 m)≈ 15 sq ft (≈ 1.4 m²)
Patio / sliding door6 × 7 ft (1.8 × 2.1 m)≈ 42 sq ft (≈ 3.8 m²)

Measure your own openings if they differ much from these. Small openings, such as a single switch plate, are not worth subtracting, and they help cover touch-up waste.

How many coats?

  • One coat may be enough when repainting the same or a very similar colour over a sound, clean surface.
  • Two coats are the usual recommendation for even colour and durability, and the default here.
  • Three coats or primer may be needed for big colour changes (especially light over dark), deep reds and yellows, or fresh drywall and patches.

Gallons, quarts and litres

In the US, paint is sold in gallons (3.785 L) and quarts (a quarter gallon, about 0.95 L). Larger 5-gallon buckets are also common. Elsewhere it is sold in litres, often in 1, 2.5, 5 and 10 L tins. The calculator rounds up to whole units and, for US sizes, suggests a gallon-plus-quart combination when that is enough. To convert other amounts, use gallons to liters or liters to gallons.

Tips for buying the right amount

  • Buy all the paint for a room at once, or mix cans together (called boxing), so the colour matches across walls.
  • Keep a little spare for touch-ups, and note the colour code and finish.
  • Trim and doors usually take a different sheen. A quart often covers the trim in a typical room.
  • Exterior walls are usually rougher, so expect lower coverage than the can's best case.
  • For the floor area of the same room, use the square footage calculator.

Frequently asked questions

How much paint do I need for a 12×12 room?
With 8 ft walls the wall area is 2 × (12 + 12) × 8 = 384 sq ft. After one door and one window (about 36 sq ft) that leaves 348 sq ft. Two coats at 350 sq ft per gallon need about 2 gallons. Check your paint’s stated coverage.
How many square feet does a gallon of paint cover?
Manufacturers commonly quote somewhere around 250–400 sq ft per gallon for one coat, depending on the product and the surface. The calculator defaults to 350, which you can edit to match your can’s label.
How many square meters does a litre of paint cover?
Many emulsions state roughly 10–14 m² per litre on smooth surfaces, less on porous or textured ones. The calculator uses 10 m²/L as a conservative default that you can change.
Do I subtract doors and windows when calculating paint?
Yes, for anything sizeable. A typical door is about 21 sq ft (1.9 m²) and a window about 15 sq ft (1.4 m²). Small openings can be ignored; the extra paint covers waste and touch-ups.
Is one coat of paint enough?
Sometimes, when you are repainting a similar colour over a good surface. Two coats are generally recommended for even colour and durability. Strong colour changes or new drywall may need primer as well.
How much paint do I need for a ceiling?
A flat ceiling’s area is simply length × width. Multiply by the coats and divide by the coverage. Tick “Also paint the ceiling” to calculate it separately, since ceilings usually use their own flat paint.

Last reviewed November 2026. Results are estimates for information only — see our disclaimer.

Related tools

All everyday tools