Square Footage Calculator

Measure one room or a whole house. Add rooms of different shapes, get the total in square feet, square meters and square yards, and estimate the material cost.

Free, no sign-upRuns in your browserUpdated November 2026
Rooms & areas
Feet and inches? Enter decimal feet: 12 ft 6 in = 12.5 ft (inches ÷ 12).
Cost & waste (optional)
$
%
Example price only. Use the quote from your supplier.
Total area
—
Square feet
—
Square meters
—
Square yards
—
With waste
—
Estimated cost
—
Acres
—
RoomShapesq ftm²

How to use the Square Footage Calculator

  1. Choose your measurement unit: feet, inches, yards, meters or centimeters.
  2. For each room, pick a shape (rectangle, L-shape, circle, triangle or trapezoid) and enter its dimensions. Use + Add room for more areas. Your rooms are saved in this browser.
  3. Read the total area in square feet, square meters and square yards, with a per-room breakdown in the table.
  4. Optionally enter a price per unit area and a waste % to estimate the cost of flooring, tile, sod or other materials.

How to calculate square footage

Square footage is the area of a flat surface measured in square feet. For a rectangular room, measure the length and the width in feet and multiply them. A room 12 ft by 15 ft is 12 × 15 = 180 sq ft. Irregular spaces are handled the same way: split the floor into simple shapes, find the area of each, and add them together. That is what this calculator does for every room you add.

Rectangle: A = length × width L-shape: A = (L₁ × W₁) + (L₂ × W₂) Circle: A = π × (diameter ÷ 2)² Triangle: A = base × height ÷ 2 Trapezoid: A = (a + b) ÷ 2 × height

Converting units

FromToMultiply by
sq ftm²0.09290304
m²sq ft10.7639
sq ftsq yd1 ÷ 9 (0.1111)
sq insq ft1 ÷ 144
sq ftacres1 ÷ 43,560

Always convert lengths before multiplying, or convert the final area with the squared factor. A frequent mistake is dividing square inches by 12 instead of 144. For quick single conversions, see sq ft to sq m or feet to meters.

Worked example: three rooms

  • Living room, 20 ft × 15 ft = 300 sq ft
  • Bedroom, 12 ft × 12 ft = 144 sq ft
  • L-shaped kitchen, split into 12 × 10 = 120 sq ft and 8 × 6 = 48 sq ft, so 168 sq ft

Total = 300 + 144 + 168 = 612 sq ft, which is 612 × 0.09290304 ≈ 56.86 m² or 612 ÷ 9 = 68 sq yd. If flooring costs an example $4.50 per sq ft and you add 10% for cuts and waste, you need 673.2 sq ft and the material cost is about $3,029.40. These are the default values loaded above.

Measuring tips

  • Measure wall to wall at floor level, ignoring baseboards. Round up to the nearest inch or centimeter.
  • Convert feet and inches to decimal feet. 12 ft 6 in is 12.5 ft, and 10 ft 9 in is 10.75 ft (inches ÷ 12).
  • Do not double count where an L-shape's two rectangles meet. Draw the split on paper first so the pieces do not overlap.
  • Closets and alcoves count if the material goes there. Add them as their own small rectangles.
  • Subtract fixed obstacles such as kitchen islands only if the material will not go under them. The easiest way is to measure the floor around them as separate rectangles.

How much extra material to buy

Materials are cut to fit, so you need more than the bare area. Suppliers commonly suggest these allowances. Check the product instructions, because diagonal layouts and large-format tiles need more.

MaterialTypical overage
Carpet, vinyl plank, laminate (straight lay)5–10%
Tile, straight pattern10%
Tile or wood, diagonal or herringbone15–20%
Sod or turf5–10%

Square footage of a house

For a whole home, real estate listings usually report finished, heated living area, measured from the exterior walls, and leave out garages, unfinished basements and open porches. Exact rules vary by country and by organisation, so an appraiser's figure may not match a room-by-room interior total. Use this calculator for project planning such as flooring, paint or heating. For an official figure, rely on a professional measurement. For walls, use the paint calculator. For a slab, the concrete calculator adds the depth.

Frequently asked questions

How do I calculate the square footage of a room?
Measure the length and width in feet and multiply them. A 12 × 15 ft room is 180 sq ft. For irregular rooms, split the floor into rectangles, triangles or circles, calculate each, and add them up.
How do I calculate square footage with feet and inches?
Convert inches to decimal feet by dividing by 12, then multiply. For example, 10 ft 6 in × 12 ft 3 in = 10.5 × 12.25 = 128.63 sq ft.
How do I find the area of an L-shaped room?
Split the L into two rectangles that do not overlap, calculate each area, and add them. Choose “L-shape” in the calculator and enter both rectangles’ dimensions.
How many square feet are in a square meter?
One square meter is about 10.764 square feet, and one square foot is exactly 0.09290304 square meters.
How many square feet are in a square yard?
Nine. A square yard is 3 ft × 3 ft. Carpet is often priced per square yard, so divide square feet by 9 to convert.
How much extra flooring should I buy?
A common rule is 5–10% extra for straight installations and 15–20% for diagonal or herringbone patterns. Follow the manufacturer’s recommendation, and keep a spare box for future repairs.

Last reviewed November 2026. Results are estimates for information only — see our disclaimer.

Related tools

All everyday tools