How to use the Tone Generator
- Turn the volume down first. It starts at 20% (−48 dBFS), which is quiet on most devices. The slider spans −60 to 0 dBFS.
- Set a frequency with the slider, type an exact value in hertz, or pick a preset such as 440 Hz or 1 kHz.
- Choose a waveform (sine, square, sawtooth or triangle) and a channel: left, right or both.
- Press Play, then raise the volume slowly. Use ×2 and ÷2 to jump an octave.
- For a sweep, enter start and end frequencies and a duration, pick logarithmic or linear, and press Start sweep.
What you can do with an online tone generator
A tone generator plays a steady signal at an exact frequency. It is a simple but versatile tool: musicians use it as a tuning reference, audio engineers to check speakers, headphones and room resonances, teachers to demonstrate pitch and harmonics, and curious people to find the highest frequency they can still hear. This one runs entirely in your browser using the Web Audio OscillatorNode, so there is nothing to install and no audio files are downloaded.
The four waveforms
| Waveform | Harmonics | Sound and typical use |
|---|---|---|
| Sine | None: the fundamental only | Pure, smooth tone. Best for hearing tests, tuning and measuring frequency response. |
| Square | Odd harmonics at 1/n amplitude | Hollow, buzzy, like an old video game. Useful for checking distortion and rattles. |
| Sawtooth | All harmonics at 1/n amplitude | Bright and brassy; the classic synthesiser sound. |
| Triangle | Odd harmonics at 1/n² amplitude | Soft, flute-like; between a sine and a square. |
Square, sawtooth and triangle tones contain energy at multiples of the base frequency, so a 5 kHz square wave also produces 15 kHz and 25 kHz components. The browser generates these waveforms band-limited, so harmonics above half the sample rate are left out rather than folding back as aliasing. At the same volume setting, a square wave sounds noticeably louder than a sine.
Frequency range and the log slider
You can generate anything from 1 Hz to 22 kHz (limited to half your audio device’s sample rate, usually 22.05 or 24 kHz). Human hearing typically spans about 20 Hz to 20 kHz in young people, and the upper limit drops with age. Most small speakers cannot reproduce much below 80–150 Hz, so a 30 Hz tone may be silent on a laptop even though the signal is there.
Because we hear pitch in ratios, the slider is logarithmic: each step multiplies the frequency by the same factor, so every octave gets the same amount of travel. The mapping is:
Sweeps: linear vs logarithmic
A sweep glides from a start frequency to an end frequency. In a linear sweep the frequency rises by the same number of hertz each second, so from 20 Hz to 20 kHz most of the time is spent above 10 kHz. A logarithmic (exponential) sweep multiplies the frequency by a constant factor per second, spending equal time on each octave, which is usually what you want for testing speakers or finding room resonances.
Example: a 20-second log sweep from 20 Hz to 20,000 Hz covers about 10 octaves, so it passes 200 Hz after 6.7 seconds and 2,000 Hz after 13.3 seconds. A linear sweep over the same range would already be at 2,018 Hz after 2 seconds. The sweep fades out and stops by itself at the end; changing the frequency during a sweep cancels it and keeps the tone playing. For a full speaker check including left/right and polarity, try the speaker test.
Presets explained
- 440 Hz is A above middle C, the standard tuning pitch (ISO 16).
- 1 kHz is the classic reference test tone used for level calibration in broadcast and audio equipment.
- 50 Hz and 60 Hz are the mains frequencies (50 Hz in most of Europe, Asia and Africa, 60 Hz in North America and parts of South America and Asia). A hum at one of these, or at twice that frequency, usually means a ground loop or electrical interference.
- 17.4 kHz is the so-called mosquito tone, often audible to teenagers but not to many adults, because high-frequency hearing declines with age.
Safety
Keep the volume low, especially with headphones. A continuous tone is more tiring than music, and high-frequency tones may be loud even when they seem faint. Very low frequencies at high volume can push speaker cones beyond their limits. Stop at once if you feel discomfort or ringing in your ears. To estimate how loud your room is, use the sound meter.
Frequently asked questions
What frequency can humans hear?
Why can’t I hear very low or very high tones?
Is this a real hearing test?
Can I play a tone in only one ear?
What is the difference between a sine and a square wave?
Does the tone generator work offline?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.