How to use the Refresh Rate Test
- Open the page and leave it in front for a few seconds. Keep the browser window entirely on one monitor.
- Read Your refresh rate. The raw value underneath is the exact median measurement before rounding.
- Watch the frame-time graph: an even row of bars means smooth delivery; red spikes are dropped frames.
- Use the motion test and speed selector to compare full, ½ and ¼ rate motion and look for ghosting or blur.
- If the result is lower than expected, change the setting in your OS (see below), then press Restart measurement.
How this refresh rate test works
Browsers call requestAnimationFrame once for every frame they are about to draw, and on a normal desktop or phone that is synchronised to the display’s vertical refresh (vsync). The test records the time between consecutive callbacks over a rolling window of the last 180 frames and takes the median interval. The median ignores the occasional slow frame, so it reflects the real refresh period rather than background hiccups.
For example, a median of 6.94 ms gives 1000 ÷ 6.94 ≈ 144.1 Hz. The result is then rounded to the nearest common rate (30, 50, 60, 75, 90, 100, 120, 144, 165, 240 or 360 Hz) when it is within 4% of it, because displays often run at fractional rates such as 59.94 Hz or 143.9 Hz. If the measurement is not close to any common rate, the tool shows the rounded raw value and says so. The raw value is always shown too.
Dropped and jittery frames
A frame that takes more than 1.5 times the median means the browser missed at least one refresh; the counter adds the number of refreshes that were skipped. A frame more than 25% away from the median, without a full skip, is counted as jitter. A few of each in a minute is normal — opening another tab, scrolling or a background task can cause them. A constant stream of red bars usually points to a busy CPU or GPU, an extension, or power-saving throttling rather than a faulty monitor.
Why the result might be lower than your monitor’s maximum
- Battery saver and power modes. Laptops on battery may lower the refresh rate or limit animation. Chrome’s Energy Saver and similar browser modes can cap frame rates (commonly to around 30 fps), and iPhone Low Power Mode limits ProMotion displays to 60 Hz.
- Browser throttling. Background tabs, minimised windows and some embedded or cross-origin frames are throttled heavily. Keep the tab focused and visible. Safari on iPhone and iPad has historically delivered animation frames at up to 60 Hz even on 120 Hz ProMotion screens, depending on its settings, so a 60 Hz reading there does not necessarily mean the panel runs at 60 Hz.
- Multiple monitors. The browser normally syncs to the monitor the window is on. If the window spans two displays, or you have mixed refresh rates, you may see the lower rate. Move the window fully onto the screen you want to test and press Restart.
- Variable refresh rate (G-SYNC, FreeSync, adaptive refresh). On VRR displays, the rate can follow the content. Phones and laptops with adaptive refresh may drop to 60 Hz or lower for static content and ramp up when things move — the motion test helps keep them at their maximum.
- Cable and port. High resolutions at high refresh rates need enough bandwidth. An older HDMI cable or port can limit a 1440p or 4K monitor to 60 Hz; DisplayPort or HDMI 2.0/2.1 is usually needed.
How to set 120 Hz or 144 Hz
Windows 11 and 10
Open Settings → System → Display → Advanced display and pick the highest value under Choose a refresh rate (on Windows 10 it is Advanced display settings → Refresh rate). If the option you expect is missing, check the cable, update the graphics driver and look in the NVIDIA, AMD or Intel control panel. Windows 11 also offers a Dynamic option on supported laptops that switches between 60 Hz and a higher rate.
macOS
Open System Settings → Displays, select the display and choose a value from Refresh Rate. MacBook Pro models with ProMotion offer a ProMotion setting that adapts up to 120 Hz. External monitors show the rates they advertise over the cable you use.
Android
The setting varies by brand. On Google Pixel it is Settings → Display → Smooth display; on Samsung Galaxy it is Settings → Display → Motion smoothness, where Adaptive allows up to 120 Hz. Battery-saving modes may turn high refresh off.
iPhone and iPad (ProMotion)
ProMotion on supported iPhone Pro and iPad Pro models is automatic, adapting up to 120 Hz; there is no switch to force it on. Make sure Settings → Accessibility → Motion → Limit Frame Rate is off and Low Power Mode is disabled. As noted above, Safari may still report 60 Hz in a web page.
Using the motion test
The motion test draws the same object moving at your full refresh rate, at half of it and at a quarter of it, similar to the popular “UFO” test. Higher refresh rates show each object in more positions per second, so motion looks smoother and your eye’s tracking produces less blur. Pick a speed: at 960 pixels per second on a 60 Hz screen, the object jumps 16 px per frame; at 144 Hz it jumps under 7 px. Watch the black and white bars below each object — a faint trailing copy or coloured fringe is ghosting or overshoot from slow pixel response, which overdrive settings in your monitor’s menu can change. This is a visual comparison, not a lab measurement of response time.
Checking a new display? Also run the dead pixel test, confirm your screen resolution, and test your input devices with the mouse test.
Frequently asked questions
How do I know if my monitor is running at 144 Hz?
Is this refresh rate test accurate?
Why does my 120 Hz iPhone show 60 Hz?
What counts as a dropped frame?
What is the motion (UFO) test for?
Why does my result change on a laptop?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.