How to use the Screen Size Calculator
- Pick a preset for Screen A, or type its diagonal (inches or cm) and resolution in pixels.
- Do the same for Screen B to compare two monitors, TVs, laptops or phones.
- Read the PPI, width, height, area and dot pitch in the results and table. The “B vs A” column shows the percentage difference.
- Use the THX, SMPTE and retina distances to choose how far to sit, and check the to-scale outline to see the real size difference.
- Press Copy results, or copy the page URL — it keeps your inputs so you can share the comparison.
How the screen size calculator works
A screen is sold by its diagonal, but the diagonal alone does not tell you how wide or tall it is, how sharp it looks or how far away you should sit. This calculator combines the diagonal with the resolution (or just the aspect ratio) and uses the Pythagorean theorem to work out everything else. Pixels on modern displays are square, so the ratio of horizontal to vertical pixels is also the ratio of the physical width to height.
Formulas
Width = diagonal × W ÷ √(W² + H²) · Height = diagonal × H ÷ √(W² + H²)
PPI = √(W² + H²) ÷ diagonal (inches)
Dot pitch (mm) = 25.4 ÷ PPI
Viewing distance for angle θ = width ÷ (2 × tan(θ ÷ 2))
Retina distance = 1 ÷ (PPI × tan(1′)) ≈ 3,438 ÷ PPI inches
W and H are the horizontal and vertical pixel counts (or the two numbers of the aspect ratio when you only know that). For centimetres, the calculator first converts the diagonal using 1 inch = 2.54 cm.
Worked example: 27″ 1440p vs 32″ 4K
A 27-inch 2560 × 1440 monitor has a pixel diagonal of √(2560² + 1440²) = 2,937.2 pixels. Dividing by 27 inches gives 108.79 PPI, and the dot pitch is 25.4 ÷ 108.79 = 0.2335 mm. The panel is 27 × 2560 ÷ 2937.2 = 23.53 in wide and 13.24 in tall, an area of about 311.5 in² (2,010 cm²).
A 32-inch 3840 × 2160 monitor works out to 137.68 PPI, 27.89 × 15.69 in and 437.6 in². So the 32-inch 4K screen has about 40% more area and is about 27% sharper per inch, while showing 2.25 times as many pixels. At 100% scaling it would show tiny text, which is why 4K monitors are usually run at 125–150% scaling.
Pixel density: what is sharp enough?
| Device type | Typical PPI | Typical viewing distance |
|---|---|---|
| 24″ 1080p monitor | ≈ 92 | 60–80 cm |
| 27″ 1440p monitor | ≈ 109 | 60–90 cm |
| 27″ 4K monitor | ≈ 163 | 50–80 cm |
| 65″ 4K TV | ≈ 68 | 2–3 m |
| Recent flagship phones | ≈ 400–500 | 25–35 cm |
PPI only means something together with distance. The retina distance is the point where one pixel spans 1 arcminute (1/60 of a degree), the common figure for the resolving limit of normal 20/20 vision. Beyond that distance a person with typical eyesight can no longer pick out individual pixels. For the 27″ 1440p monitor that is about 31.6 in (80 cm); for the 32″ 4K it is 25 in (63 cm). Many people see better than 20/20, so treat it as a guideline, not a hard limit.
Ideal viewing distance: THX and SMPTE
Home-cinema guidance is based on how much of your field of view the screen fills. The calculator uses the horizontal viewing angle:
- SMPTE (about 30°) — the long-standing recommendation from the Society of Motion Picture and Television Engineers for a comfortable, relaxed view. Distance ≈ 1.87 × screen width.
- THX (about 40°) — THX’s recommendation for a more immersive, cinema-like view. Distance ≈ 1.37 × screen width.
For a 65″ 16:9 TV (56.6 in wide) that is about 2.0 m for THX and 2.7 m for SMPTE, while its 4K retina distance is about 1.3 m — so from a normal sofa distance 4K detail is already at or beyond what most eyes resolve. For desk monitors, the angle-based figures are often further away than people actually sit; there, the retina distance and comfortable text size matter more. Distances for phones are shown for completeness but are rarely useful.
Why phone PPI can differ slightly from the spec sheet
The iPhone 16 preset (6.1″, 2556 × 1179) calculates to about 461 PPI, while Apple quotes 460 ppi. Manufacturers round the advertised diagonal, and phone screens with rounded corners are measured as if they were a full rectangle, so the true diagonal is a little different from the marketing number. The presets use the published diagonals and resolutions as examples; always check the exact model you are buying.
Tips and common mistakes
- Do not compare diagonals across aspect ratios. A 34″ 21:9 ultrawide is about as tall as a 27″ 16:9 monitor, not taller. Compare width, height and area instead.
- Area grows with the square of the diagonal. A 65″ TV has about 40% more picture area than a 55″, not 18%.
- Dot pitch and PPI are the same information expressed differently: smaller pitch means higher density.
- Measure your desk. Use the width result plus a few centimetres for the bezel and stand.
To find what your current display reports, use What is my screen resolution, and check a new panel with the dead pixel test and refresh rate test.
Frequently asked questions
How do I calculate PPI?
Is PPI the same as DPI?
How wide is a 27-inch monitor?
Is a 32-inch 4K monitor sharper than a 27-inch 1440p?
How far should I sit from a 65-inch TV?
What is dot pitch?
What is retina distance?
Last reviewed November 2026. Results are estimates for information only — see our disclaimer.